The market of ABS resin continues to grow because of its functionality.
・High pressure resistance
・High heat resistance
・Good Transparency
・High acid/alkali resistance
・Electric insulation
*Some of those property can be gained by changing ration of components (Acrylic nitrile, Butadiene, Styrene)
-Applications: home electrical appliance (refrigerator, TV, vacuum cleaner)
IONPURE is developed to show high performance in ABS resin at low dosage level.
- Lower dosage: about 0.3-0.5w/v%
- Less discoloration
- Good Durability
- Safe： EPA and BPD approved grade
Test method: ISO 22196/JIS Z 2801 Tested bacteria: Escherichia coli
| Sample | Number of living bacteria | Antimicrobial activity value against control |
Reduction % |
|
|---|---|---|---|---|
| At beginning | After 24 hours | |||
| Blank ABS Sample | 1.0× 105 | 1.6 × 107 | - | - |
| IONPURE 0.3% | 1.0 × 105 | <1 × 102 | >5.2 | 99.999 |
Test method: ISO 22196/JIS Z 2801 Tested bacteria: Staphy▫C▫Ccus aureus
| Sample | Number of living bacteria | Antimicrobial activity value against control |
Reduction % |
|
|---|---|---|---|---|
| At beginning | After 24 hours | |||
| Blank ABS Sample | 1.0× 105 | 5.4× 105 | - | - |
| IONPURE 0.3% | 1.0 × 105 | <1 × 102 | >3.7 | >99.981 |
Pre-treated: Soak the sample in water (at room temperature for 16 hours)
*Equivalent to more than 5years usage of interior applications. (refrigerator, TV, vacuum cleaner)
Test method: ISO 22196/JIS Z 2801 Tested bacteria: Escherichia coli
| Sample | Number of living bacteria | Antimicrobial activity value against control |
Reduction % |
|
|---|---|---|---|---|
| At beginning | After 24 hours | |||
| Blank ABS Sample | 1.0× 105 | 4.4× 105 | - | - |
| IONPURE 0.3% | 1.0 × 105 | <1 × 102 | >3.6 | >99.977 |
Test method: ISO 22196/JIS Z 2801 Tested bacteria: Staphylococcus aureus
| Sample | Number of living bacteria | Antimicrobial activity value against control |
Reduction % |
|
|---|---|---|---|---|
| At beginning | After 24 hours | |||
| Blank ABS Sample | 1.0× 105 | 1.0× 106 | - | - |
| IONPURE WPA(A) 0.3% | 1.0 × 105 | <1 × 102 | >5.0 | >99.999 |
| Sample | Discoloration (Visual check) |
|---|---|
| IONPURE 0.3% | None |
- Please make masterbatch and then, dilute with pure resin masterbatch in order to disperseIONPURE WPA(A) uniformly in resin.
(Same method to disperse color pigments or the other additives) - Recommendable concentration of masterbatch: 10-30%
- IONPURE WPA(A) is suitable for plates of which thickness is more than 20micron.